- It is used as load-bearing scaffold for floor formwork
- The system used in this way provides economy by being used as a working scaffold for further stages.
- As a rigid system is set up thanks to connection of horizontal and vertical, loadbearing capacity is high and secure.
- Cup-lock distances on the pillars are 100 cm and these distances can be 50 cm according to load measure.
- Horizontal elements can be used for these distances according to load to be born.
- The cups are produced of 5 mm sheet and they are connected to the props via welding.
- On these cups, there are mobile cups which are produced as Sphero casting and to which horizontal elements connect.
- The props interlock to each other through vertical connection elements.
- Load-bearing capacity is higher compared to other Flange Systems.
- It provides secure and quick erection facility. Interconnection of horizontal and vertical elements is achieved easily without need of elements such as wedges, nuts etc.
- Installation and demount is practical thanks to cups on the vertical elements.
- Vertical elements (props) are made of TSE certified standard pipes which are 48 mm in diameter and 3 mm in thickness, and horizontal elements 48 mm in diameter and 2,5 mm in thickness.
- In the production, TSE certified standard pipes which are 48mm in diameter are used.

The elements constituting the system can optionally be:

Painted with immersion,
Painted with anodic oxidation paint
Electro galvanized
Hot-dip galvanized

Note: On condition that its price is paid, the systems can be painted in desired colors.

The elements constituting the system:

- Vertical element
- Horizontal element
- Lower setting jack
- Upper setting jack
- Prop interlock element
- Lower beam supporting element
- Console

- In addition to the fact that it is used as load-bearing scaffold for floor lower formwork, it is also used as working scaffold for facades and other premises and spaces.
- So, the system which is initially used as a load-bearing system has the facility to be used for other stages till the end of the construction.
- Cup-lock distances on the pillars are 100 cm and these distances can be 50 cm according to load measure.
- Horizontal elements can be used for these distances according to load to be born.
- The cups are connected to the props via welding.
- On these cups, there are mobile cups which are produced as Sphero casting and to which horizontal elements connect.
- The props interlock to each other through vertical connection elements.
- Load-bearing capacity is higher compared to other Flange Systems.
- It provides secure and quick erection facility. Interconnection of horizontal and
vertical elements is achieved easily without need of elements such as wedge,
nuts etc.
- Installation and demount is practical thanks to cups on the vertical elements.
- Vertical elements (pillars) are made of TSE certified standard pipes which are 48
mm in diameter and 3 mm in thickness, and horizontal elements 48 mm in
diameter and 2,5 mm in thickness.
- In the production, TSE certified standard pipes which are 48mm in diameter are
used.

The elements constituting the system can optionally be:
Painted with immersion,
Painted with anodic oxidation paint
Electro galvanized
Hot-dip galvanized

Note: On condition that its price is paid, the systems can be painted in desired colors.

The elements constituting the system:

- Vertical element
- Horizontal element
- Base Spindle
- Prop interlock element
- Console
- Bearer (fixed/adjustable)
- Metal Plank